May 13,2022
There are many types of plum blossom open-ended wrenches
Torx open-ended wrenches are very useful, both in industry and in daily repairs. If you want to know more about the torx-shaped open-end wrench, I will chat with you.
The two ends of the plum blossom open-end wrench are garland, and the inner hole is formed by two regular hexagons concentrically staggered by 30°. Many Torx wrenches have elbows, and common elbow angles are between 10° and 45°. Viewed from the side, the rotating bolt part and the handle part are staggered. This structure facilitates removal of bolts and nuts installed in recessed spaces and provides operating clearance for fingers to prevent scratches.
For assisted tightening and similar operations, a Torx wrench can be used to apply greater torque to a bolt or nut. Also, Torx wrenches come in a variety of sizes, so choose the one that corresponds to the size of the bolt or nut. Because the wrench jaws are double hex, the bolts and nuts are easy to assemble, so that they can be reinstalled in limited spaces.
It should also be noted that with your left hand, push the connection between the torx wrench and the bolt so that the torx wrench and bolt are fully matched to prevent slippage, and use your right hand to hold the other end of the torx wrench and apply force. Torx wrenches completely enclose the heads of bolts and nuts, so they don't damage the corners of the bolts and can apply high torque. Crown sequence reminds everyone that it is strictly forbidden to put an extension tube on the wrench to extend the length of the wrench to increase the torque, and it is strictly forbidden to tap the wrench to increase the torque, otherwise the tool will be damaged, and it is strictly forbidden to use the Torx wrench with cracks and serious wear on the inner hole.
There are many functions of the plum blossom open-ended wrench, and the crown sequence is a simple science for you. The Torx wrench is easy to install on the nut and not easy to fall off. Applies to the first loosening nut or the last locking nut. The product is continuously randomly sampled by the national hardware product supervision and inspection department, and is subject to quality supervision and inspection according to the national standard GB-10686-10691-89. The technical indicators of destructive testing have reached the level of high-quality products. Tapping, friction, impact, impact and other operating methods will not cause safety accidents.
The Torx wrench is easy to install the nut, not easy to fall off, suitable for the first loosening nut or the last locking nut. To avoid damage to the nut of the pipe fitting during disassembly and assembly, the slotted wrench was modified to a pipe wrench.